embedded power for business-critical continuity bxb150 series single output special features ? industry standard footprint mtbf >1.4 million hours (bellcore 332) ? input voltage to ets300-132-2 ? adjustable output voltage ? no minimum load required ? separate case ground pin ? 2:1 input range for battery powered applications ? undervoltage lockout (uvlo) ? ul, vde and csa safety approvals ? available rohs compliant ? 2 year warranty total power: 150 w input voltage: 18 - 36 vdc 36 - 75 vdc # of outputs: single safety vde0805/en60950/iec950 ul1950 csa c22.2 no. 950 rev.05.13.08 bxb150 1 of 4 electrical specifications output voltage adjustability: 60% to 110% setpoint accuracy: 1.0% line regulation low line to high line 0.5% load regulation full load to min. load 0.10% minimum load 0 % overshoot at turn on and turn-off none undershoot none ripple and noise 5 hz - 20 mhz (see note 1) 3.3 v and 5 v 75 mv pk-pk, 20 mv rms 12v and 15 v 100 mv pk-pk, 30 mv rms temperature coefficient 0.01% / o c transient response (see note 2) 2.0% max. deviation 170 srecovery to within 1.0% remote sense 0.5 vdc transmission line drop compensation
rev.05.13.08 bxb150 2 of 4 embedded power for business-critical continuity input input voltage range 24 vin nominal 18 - 36 vdc 48 vin nominal 36 - 75 vdc input current no load 130 ma max. remote off 20 ma max. input current (max.) (see note 4) 24 vin 9.0 a max. @ lo max. and vin = 0 to 75 v 48 vin 6.5 a max. @ lo max. and vin = 0 to 75 v input reflected ripple (see note 6) 5 ma pk-pk active low remote on/off logic compatiblity on off (see note 7) open collector ref to -input 1.2 vdc max. open circuit undervoltage lockout: 24 vin: power-up 17 v 24 vin: power-down 16.3 v 48 vin: power-up 34 v 48 vin: power-down 32.5 v startup time (see note 8) power-up 20 ms remote on/off 20 ms thermal performance operating case temp. -40 oc to +100 oc non-operating -55 o c to +125 o c altitude operating 10,000 feet max. non-operating 40,000 feet max. vibration 5 - 500 hz 2.4 g rms (approx.) environmental specifications general specifications efficiency see table isolation voltage input/case 1500 vdc input/output 1500 vdc output/case 1500 vdc switching frequency fixed 500 khz typ. approvals and standards (see note 5) vde0805, en60950, iec950 ul1950, csa c22.2 no. 950 case material aluminum baseplate with plastic case weight 110 g (3.88 oz) mtbf bellcore 332 1,400,000 hours mil-hdbk-217f 580,000 hours min. @ 40 c, 100% fl emc charateristics conducted emissions (see note 3) bellcore 1089 level a fcc part 15 level a en55022, cispr22 level a p rotection short-circuit continuous, automatic recovery overvoltage non-latching undervoltage non-latching thermal 110 c baseplate, automataic recovery t eleco m specifications central office interface a ets300-132-2
rev.05.13.08 bxb150 3 of 4 embedded power for business-critical continuity notes 1 measured with 10 f tantalum capacitor and 1 f ceramic capacitor across output. 2 di/dt = 0.1 a/1 s, vin = 48 vdc, tc = 25 c, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 units should be characterised within systems. external components required. 4 input fusing is recommended based on surge current and maximum input current. 5 this product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 simulated source impedance of 12 h. 12 h inductor in series with +vin. 7 active high remote on/off option is available (standard product is active low), designate with the suffix fht e.g. bxb150-48s05fhtj . consult factory for further details and options. 8 start-up into resistive load. 9 the j suffix indicates that these parts are pb-free (rohs 6/6) compliant. tse rohs 5/6 (non pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 10 notice: some models do not support all options. please contact your local sales representative or use the on-line model number search tool at http://www.powerconversion.com to find a suitable alternative. all dimensions in inches (mm) tolerance : x.xx 0.02in. (0.51mm) x.xxx 0.010in. (0.254mm) view shown pin side up 1.90 (48.26) 0.190 (4.83) 0.010 (0.25) 2 x ?.080 (2.03) 0.002 (0.05) 4 x m3 x 0.5 through 7 x ?.040 (1.02) 0.002 (0.05) 2.28 (57.91) max. 0.700 (17.77) 1.000 (25.40) 1.400 (35.56) 2.000 (50.80) 0.190 (4.83) 0.010 (0.25) 0.400 (10.16) 0.500 (12.69) 0.010 (0.25) 0.400 (10.16) 1.000 (25.40) 1.400 (35.56) vo(+) +sen trim -sen vo (-) vi(+) on/off case vi (-) 0.200 (5.08) min. length for all input and output pins 0.500 (12.70) 2.40 (60.96) max. e x ternal ou tp u t t ri mm in g output can be externally trimmed by using the method shown. trim up trim down 8 7 6 rt1 or rt2 o rderin g infor m ation output power (max.) input voltage ovp output voltage output current (min.) output current (max.) efficiency (typ.) regulation model number l ine l oad 100 w 18 - 36 vdc 4.3 vdc 3.3 v 0 a 30 a 77% 0.05% 0.1% BXB150-24S3V3FLTJ 100 w 36 - 75 vdc 4.3 vdc 3.3 v 0 a 30 a 79% 0.05% 0.1% bxb150-48s3v3fltj 150 w 36 - 75 vdc 6.5 vdc 5 v 0 a 30 a 84% 0.05% 0.1% bxb150-48s05fltj 150 w 36 - 75 vdc 14.5 vdc 12 v 0 a 12.5 a 84% 0.05% 0.1% bxb150-48s12fltj 150 w 36 - 75 vdc 17.5 vdc 15 v 0 a 10 a 88% 0.05% 0.1% bxb150-48s15fltj p in connections p in n um b er f u nction 1 +vin 2 remote on/off 3 case 4 -vin 5 -vout 6 -sense 7 trim 8 +sense 9 +vout mechanical drawin g
embedded power for business-critical continuity rev.05.13.08 bxb150 4 of 4 americas 5810 van allen way carlsbad, ca 92008 usa telephone: +1 (760) 930 4600 facsimile: +1 (760) 930 0698 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom telephone: +44 (0) 1384 842 211 facsimile: +44 (0) 1384 843 355 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong telephone: +852 2176 3333 facsimile: +852 2176 3888 for global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com while every precaution has been taken to ensure accuracy and completeness in this literature, emerson network power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. emerson network power and the emerson network power logo are trademarks and service marks of emerson electric co. ?2008 emerson electric co. emersonnetworkpower. com embedded computing embedded power monitoring outside plant power switching & controls precision cooling racks & integrated cabinets services surge protection emerson network power. the global leader in enabling business-critical continuity. ac power connectivity dc power
|
